Services

Home Services

We provide the services like:

  1. CEMENT
  • 1.1 Physical Tests
  1. Normal Consistency
  2. Initial/Final setting time
  3. Compressive Strength
  1. Soundness
  2. Fineness
  3. Specific Gravity
  • 1.2 Chemical Analysis
  1. Loss on ignition (L.O.I)
  2. Insoluble residue (I.R)
  3. SO3
  4. Silica (SiO2)
  5. Alumina(Al2O3)
  6. Iron (Fe2O3)
  7. Lime (CaO)
  8. Magnesia(MgO)
  1. Chloride(CI)
  2. Total Alkalies(Na2O+K2O)
  3. specific Surface
  4. Tri Calcium Aluminate(C3A)
  5. Tetra Calcium Alumina Ferrite(C4AF)
  6. Tri Calcium Silicate (C3S)
  7. di Calcium Silicate(C2S)
  1. AGGREGATES
  • 2.1 Fine Aggregates (Sand) - Physical Tests
  1. Sieve Analysis/Fineness modulus
  2. % Silt By Weight
  3. % Silt By Volume
  4. Bulkage
  1. Moisture Absorption
  2. Specific Gravity
  3. D.L. B.D.
  • 2.2 Coarse Aggregates - Physical Tests
  1. Sieve Analysis/Fineness modulus
  2. % Silt By Weight
  3. % Silt By Volume
  4. Impact Value
  5. Crushing Value
  1. Moisture Absorption
  2. Specific Gravity
  3. D.L. B.D.
  4. 10% Fine Value
  5. Flakiness/Elongation Index
  • 2.3 Fine/ Coarse Aggregates - Chemical Tests
  1. Soundness (Per Cycle)
  2. Alkali (Aggregate reactivity)
  3. Organic Impurities
  4. Deleterious Material
  1. pH
  2. Chloride
  3. sulfate
  1. BRICKS (Set Of minimum 10 bricks)
  1. Water Absorption
  2. Compressive Strength
  1. Density
  2. Effluorescence
  1. CONCRETE
  • 4.1 Physical Tests( Concrete Blocks)
  1. Compressive Strength
  2. Moisture Content
  1. Density
  2. Water Absorption
  • 4.2 Chemical Analysis
  • 4.3 Compression Testing Of Cubes/Cylinders
  1. Cubes
  2. Cylinders
  1. Flextural Strength of Beam
  2. ACT method
  • 4.4 Mix Design
  • 4.5 Compression Testing Of Cubes/Cylinders
  1. Schmidt Rebound Hammer
  2. Ultrasonic Pulse Velocity
  1. Cover Meter
  2. Concrete Cores (From 25mm. To 150mm.dia)
  1. PAVER BLOCK
  1. Water Absorption
  2. Compressive Strength
  1. STEEL
  • 6.1 Physical Tests
  1. Density
  2. % Elongation
  3. Tensile Strength
  1. Bend
  2. Rebend
  • 6.2 Chemical Analysis
  1. Carbon
  2. Sulphur
  3. Phosphorus
  1. SOIL
  • 7.1 Physical Tests
  1. Bulk Density
  2. Moisture Content
  3. Specific Gravity
  4. Sieve Analysis
  5. Hydrometer Analysis
  6. Liquid Limit/ Plastic Limit
  7. Shrinkage Limit
  1. Standard Proctor
  2. Modified Proctor &AASHTO
  3. California Bearing Ratio( Unsoaked )
  4. California Bearing Ratio( Soaked)
  5. Free Swell Index
  6. Field Density by Core Cutter
  1. PLASTICIZER
  • 8.1 Chemical Tests
  1. pH
  2. Chlorides
  3. Sulfates
  4. % Total Solids / concentration
  1. Spceific Gravity
  2. Appearance/Colour
  3. Ash Content
  • 8.2 Testing of Admixture as per (IS.9103)
  1. WATER
  1. Chlorides
  2. sulfates
  3. pH
  4. Alkalinity
  5. Total Hardness
  1. Suspended solids
  2. Organic Impurities
  3. Inorganic Impurities
  4. Acidity
  5. Total Dissolved Solids
  1. FLY ASH
  • 10.1 Physical Tests
  1. Fineness
  2. Soundness
  3. Setting Time
  1. Lime reactivity
  2. Compressive Strength
  3. Sp. Gravity
  1. WOOD
  1. Moisture Content
  2. Density
  3. Sp. Gravity
  1. PLYWOOD/PARTICLE BOARD
  1. Density & Moisture Content
  2. Glue Shear Strength
  3. Water Resistance
  1. Test For Adhesion of Ply
  2. Tensile Strength
Drop Your Details